Serial NEST

From openPicus Wiki
Jump to: navigation, search

Contents

Description

Carrier board with 2 independent serial ports (RS232 and RS485) compatible with each Flyport module. Add Wi-Fi or Ethernet communication to any serial devices such as Industrial automation, barcode readers, rfid readers, Gps, vending machines and more.

  • RS232: COM2
  • RS485: COM3

Powered by 5V on DC connector (power supply not included). On board is a 6 ways male pinstrip connector that fits the MiniUSB Programmer to download firmware to the Flyport module.

Flyport mounting instructions

Flyport modules have 1 or 2 male connectors: J1 and J2.
On this carrier board there are 2 female connectors: J1 and J2.
The right way to mount Flyport on the carrier board is: J1 must be plugged on J1 while J2 on J2.

Resources

Technical information

Libraries

SerialNEST_(OP-LIB-006)

Related Products

Where to Buy

Personal tools
Namespaces

Variants
Actions
START HERE
DEVELOPMENT
HARDWARE INFO
RESOURCES
PHASED OUT
Toolbox