General purpose prototype board compatible with each Flyport module. There's an area to solder your prorotype.
Powered by 5V on DC connector (power supply not included). On board is a 6 ways male pinstrip connector that fits the MiniUSB Programmer to download firmware to the Flyport module.
Flyport mounting instructions
Flyport modules have 1 or 2 male connectors: J1 and J2.
On this carrier board there are 2 female connectors: J1 and J2.
The right way to mount Flyport on the carrier board is: J1 must be plugged on J1 while J2 on J2.