Nest carrier board for Lighting application compatible with each Flyport module. It drives lights and other loads over Internet.
- 4 Relays (5A)
- 2 opto-isolated inputs (dry contact or 0-5/10V)
- 1 Triac (not dimmerable only On/Off, max 250W, zero-crossing circuit)
Powered by 5V on DC connector (power supply not included). On board is a 6 ways male pinstrip connector that fits the MiniUSB Programmer to download firmware to the Flyport module.
Flyport mounting instructions
Flyport modules have 1 or 2 male connectors: J1 and J2.
On this carrier board there are 2 female connectors: J1 and J2.
The right way to mount Flyport on the carrier board is: J1 must be plugged on J1 while J2 on J2.